Showing posts with label Tutorial. Show all posts
Showing posts with label Tutorial. Show all posts

Saturday, September 23, 2017

Tentacle Shading Tutorial, End

That's everything, every step involved in making this tentacle-girl image from start to finish.

Hopefully you found this useful, or at least informative. I know that when I started I would often give up on images halfway through, because they didn't look any good then, so obviously they weren't going to look any good later. Except that was 100% wrong!

It took me years to realize that making a nicely shaded image is all about passes - layering more shadows and lights and shading and effects one on top of each other, over and over, until a flat image becomes a lushly shaded work.

Of course it also would have helped me to know what layers I should be adding, and hopefully this step-by-step walkthrough will help you get started.

Thanks for reading, sincerely, H

Tentacle Shading Tutorial, Pass 12+

=
Pass 12+, Final Adjustments

The differences start getting pretty subtle at this point, so I'll include the last image as reference.

You may be thinking 'if the differences are so subtle, why do they matter?' Unfortunately it's these extra little touches that help turn an image from 'okay' to 'wow'. They are about as important as all the previous steps combined.

Anyway, I really liked the way the vignette emphasized the shine of the breasts and drew attention to the now lighter face. So I pushed this further, adding ANOTHER black overlay to the chest and ANOTHER white overlay to the face.

Again this is subtle - look at the darker blues of the chest and the slightly lighter blues of the face. The greater contrast helps separate these two parts, drawing more attention to her face and making her skin look paler and softer. The only problem is that her face became a bit too washed out, her lips too flat and her eyes looking a bit pasted on. So it was time for some makeup.

'Eye shadow' was applied by adding a black-blurre 'Overlay' around the eyes (bringing out the darker blue more), as well as a narrower, blurred black area to help blend the outline of the eyes into the face. Both of these effects helped make the eyes look like less pasted on, more a proper part of her head, shadowed by where her eyebrows would be. This also emphasised the bright colors of her eyes, just like real-life eye-shadow would. It's sometimes useful to ask why particular makeup is used - what purpose does it serve, what is it emphasizing and why. Then you can use these techniques in your work.

Again the edge of this blurred effect was cut off sharply where it extended over the tentacle beside her face (as the tentacle wouldn't be affected by the shadows of her face), using an 'Erase' layer exactly as before.

The lips were also adjusted by adding a dark-red overlay in the middle, underneath the other shading, and only in the middle of the lips. This resulted in a slightly reddish, noticably darker area in the middle of the lips. This was a very common feature of the lip tutorials I referenced earlier, and by having a darker shape in the middle of the lips, the lips look more 3 dimensional (i.e. fuller, softer, more kissable). The darker color also helps make the inside of the lips look wetter as they lead into the mouth, making the line of the mouth look more real.

Next I decided to remove the interior lines of the tendrils (separating pinks from blues), and blur the edge of the color slightly.

I felt this made the tentacles look softer and more organic, more like they were each one, round, smooth shape. This was also quick to do as I'd grouped all the pink parts into one group, so I could change their color all at once and, here, turn off their outlines all at once.

When you're building images that will have many layers and parts, taking the time to name and group them as you go will save you LOTS of time and sanity in the end.

Last but not least, some adjustments. This is an important final part of any image, and will usually involve three specific Adjustment layers to boost the colors and contrast just a little bit more.

The first adjustment layer is called 'Levels' (the same name is used in Affinity, Photoshop, and every other program I've used). There are plenty of tutorials on how to use this adjustment, and I'd recommend spending a few minutes checking one out, because what it does is very useful. A short summary is that, if your image isn't spanning all the available shades (from black to white), then you can stretch its colors out, making them use all available shades, and making your image more vibrant in the process.

The second adjustment is called 'Brightness / Contrast' (again same name across all programs). As the name implies, this controls brightness (how light your image is) and contrast (how visible the difference between shades is). Normally I will use 'Levels' first, then do some small adjustments with 'Brightness / Contrast' to see if can make things pop any more.

And finally there's 'HSL' or 'Hue Saturation Lightness'. This involves three sliders. 'Hue' allows you to make subtle adjustments to all the colors of your image at once (emphasis on subtle - moving the slider more than a few points will turn red to green and make a techno-colored explosion). Then there's 'Saturation', or how vivid the colors are. And finally there's 'Lightness' a duplication of 'Brightness' from 'Brightness / Contrast'.

Usually the final adjustment I'll make here is just playing with 'Saturation' a bit, to see if making the image a little more or a little less saturated makes it look better. Here it didn't, so this step was left out.

Next is... well, the end.
End

Tentacle Shading Tutorial, Pass 11

Pass 11, Vingette



In the same way that many people consider the Comic Sans font to be the devil, many artists consider a vignette effect to be an overused cliche. However, unlike Comic Sans (which looks terrible), vignette's are overused in art because they are one of the easiest ways to making an image look noticeably better with very little work.

A vignette (pronounced vin-yet) it basically just a circular darkening around the edges of the image.



This helps focus the attention towards the center of the image by making it comparatively lighter. It's one of the many post-processing effects the UDK game development engine includes to make games look more visually compelling and draw attention to the center of the view.

I personally think the best vignettes effects are ones that are subtle enough that they that aren't immediately noticeable. If you notice the vignette, it's failing to do its job of making you pay attention to the center of the image.

Here the vignette used is the same as the above image (a black circle with the middle cut out of it, blurred). In my case the middle is not white, but transparent, and the whole thing is applied over the top as (again) an 'Overlay' layer. This increases the contrast around the edge of the image, helping make the highlights on the arms and breasts shine even more, and making the body darker, helping to draw attention to the lighter face.

But I wanted to push this further, so thence came: final adjustments.

Tentacle Shading Tutorial, Pass 10

Pass 10, Pings



Ping highlights are THE most important part of drawing tentacles, or anything that is wet and shiny. They are also invariably used in skin (especially breasts) to make them look smooth and glossy.

These ping highlights were achieved by drawing white lines over the brightest areas. They were blurred only very slightly, and were left as a 'Normal' layer (not set to 'Overlay' for once) to make these spots the sharp, pure white highlights they're meant to be (think of light reflecting off a glossy metallic surface, how it creates bright spots of pure white - that's what this is meant to represent).

Ping highlights are also VERY useful for emphasizing shape, by having them follow the volume they're on - e.g. flowing down tentacles, around the curve of breasts, over the shapes of the lips. Again the lips receive extra attention - the shinier the lips can be the better. But the lips, and many other parts, could still be pushed further.

So now its back to: more refinement, starting with a good old vingette effect.

Tentacle Shading Tutorial, Pass 9

Pass 9, Shine



Here again I used the lighting reference, drawing all the lit areas in Affinity. These were then coloured them white and (again) blurred and to an 'Overlay' layer.

If these highlights were left as a 'Normal' layer, they'd just add white to the image, making things look washed out. By setting them to 'Overlay' they again bring out and emphasis the color as they brighten, helping things look more vivid and real.

Also again I also needed to cut out the places where the blur reached into somewhere it shouldn't, like above the near shoulder, around the tentacle between the breasts, around the tentacle wrapping round the arm, etc. Cutting out these sharp edges helps make the image look more real, implying depth and volume (where one area is darker than the areas around it because these represent different shapes with depth and volume).

While all these shines are blurred, the shines on the lips were blurred far less. This was to make the lips look a more glossy, with sharper highlights implying wetness. This was taken further in the next, and arguably most important part for drawing sexy skin and shiny tentacles: ping highlights.

Tentacle Shading Tutorial, Pass 8

Pass 8, Shadows



All shadows were traced out as black shapes, then blurred and set to an 'Overlay' layer. If the layer was kept as 'Normal', all shadows would appear black, which would make the image less colorful, more bland. By using 'Overlay', areas of black instead bring out the color of what's below them, in this case making the shadowed areas appear a vibrant blue. This makes the image MUCH more vibrant and lush than if the shadows were just dark-black. It also helps make flesh look more alive.

Have you ever seen a 3d model of a person and thought that something wasn't quite right - they looked a bit too plastic, a bit dead. That's because human skin has glow-through - if you hold you hand up to a light and look through it, your hand turns red, as some of the light is passing through your hand and the flesh underneath.

This is one of those things we usually forget about, until we see an artwork WITHOUT it - like a 3d model with plastic, dead looking skin, or an image with black, colorless shadows. In 3d models this is fixed using a SSS (Sub-Surface-Scattering) Shader, which simulated the way light passes through skin and instantly makes the entire model look much more real and alive. And in 2d art this can be achieved by using 'Overlay' and having colored shadows, as a quick way of making your person look more alive and touchable.

Anyway, after drawing all the shadows I blurred them to make them look softer, like they were falling over soft skin. BUT, blurring like this ONLY works if you then cut out the places that should still be sharp edges.

For example, look at the tendril in the lower center of the screen (the one between her breasts). Notice how the end of the tentacle is shadowed, but the breasts behind it are not. If I just blurred the shadows and left it at that, this shadow would blur ONTO the breasts, which would look wrong, because the breasts are meant to be behind the tentacle and lit differently. So to fix this, I cut out the shape around that the tendril, and made it an 'Erase' layer applied on top of the blurred shadows, cutting this area out of the shadows.

Similar affects can be achieved in Photoshop with Layer Masks, and in Paint Tools Sai with Clipping Masks, both of which have many tutorials that can be found by searching those terms.

Cutting out the shadows was only done in a few places - the mid-breasts tendril, the shadow in the nook above the nearer-shoulder (cutting the blur out from the forward tentacle), etc. In other places I deliberately let the shadows blur onto surrounding shapes, e.g. the space between the two tentacles at the top left of the image, or the tendril just touching the far breast - given this is touching, it makes sense for the tentacle to cast a little bit of a shadow onto the breast itself.

This part was brought to you by the word 'breast', which I'll be saying much more in the following part on: shine.

Tentacle Shading Tutorial, Pass 7

Pass 7, Lighting Reference



Here I again deferred to the talented silentfort to do a lighting pass - sketching over this image to draw where the shadows and lights should be.

Silentfort: When determining light and shadow, you first need to orient your light source (figure out what angle the light is coming from). Here the light is coming from above and slightly to the left of the image. Some artists will even draw an arrow on screen to remind themselves of the lighting angle.

Figuring out where light falls and shadows are cast can be tricky, but it's easier with practice. Think about the shapes of what you're drawing, how round or how flat they are, how much one part covers another. Wider areas, like the top of her head or the plump ends of her tentacles, will have broader lit areas. More delicate highlights can be used to clarify shapes like the top of her lip.

Also remember that while the underside of shapes will be in shadow, parts of her will cast shadows onto other parts as well, like the tentacle wrapping around her arm in the bottom right corner, or the two innermost tentacles casting shadows across the sides of face.

I used Paint Tool Sai for this (a program which wild horses couldn't drag me away from) and used a couple of layers at 50% opacity to trace over a .png of my drawing. I used one layer to sketch the lit areas, and a separate layer for shadows, making it easier to make corrections and erase mistakes as I went.

Hapto: Again lighting is an entire art-form in itself, one silentfort is MUCH better at than me, so I defer to their much greater knowledge when trying to rough out the lighting.

Using this lighting reference, I started drawing out all the shapes myself in Affinity, starting with the shadows.

Tentacle Shading Tutorial, Pass 6

Pass 6, Flat Colors



The main image I used for color reference was this.

Ignoring the odd pose and strangely uninterested expressions, I found the range of blues in the draenei's skin to be really appealing.

I sample the mid-tone blue to use as a starting color, as well as the tentacle whites/creams from this again, made them a bit more pink, added blush to the cheeks and bingo - a basic flat color pass.

Historically this is where I'd give up - thinking that if it looked so flat and boring now, no ammount of extra work would fix it. How wrong I was. Nice looking shading is ALL ABOUT extra work, layers and layers of it added one after another. And what makes drawn skin and tentacles really shine (sorry about the pun) is the lighting.

Tentacle Shading Tutorial, Pass 5

Pass 5, Eyes



I'll often do eyes first, as I'm continually trying to get better at them, and the level of detail I manage to achieve sets the benchmark for the level of detail of everything else.

Unfortunately I haven't been able to re-find the exact eye tutorial I used in here, so I've tried to show the stages here. The only difference between the specific tutorial I used and the many other great eye tutorials out there, was adding a star like pattern to the eye for semi-realistic detail:

This star was then coloured (here in shades of blue), then added ontop of the purple oval of the iris using 'Add' transparency at 36%, i.e., so the star barely shows up at all, adding some subtle, half-seen detail. The black pupil was then added with a bit of blue around it, then the white highlights, then everything was blurred together.

In the above image I've left the blurring off of the eye on the right hand side, to show the enormous difference blurring makes to the final effect.

Next up, colors.

Tentacle Shading Tutorial, Pass 4

Pass 4, Refinement



Art is all about refinement - finding what you like about an image and emphasizing it.

In this step I made a few changes.

The biggest change was doubling the line weight. This is because I wanted to be able to use this image as an avatar, so the lines had to be very clear even when the image was zoomed way out. You can also see the overall silhouette has changed, and we can see more of her body and chest.

Next was tweaking the shape of the lips. The initial concept from silentfort had a 'kitty' shaped mouth, but I wanted a more human shape. I Googled 'lips drawing tutorial' and studied the linework in the results I liked best. Exactly which line and shapes make the best lips is something there are MANY tutorials for.

Next was the tentacles, specifically the folds and suckers. Again I combed through lots of references images, this time of tentacles, and when I found one I liked I asked myself why I liked it, what made that drawing of tentacles look good and fleshy.

A HUGE part is shine and ping (which I'll get too soon), but some of it is linework, specifically in the folds as seen in My Pet Tentacle's work here. Note the tentacles down the bottom left, the way they're folded over themselves, looking nice and squishy. I applied that to my image wherever possible.

As for suckers I went back and forth between different references, including Google searches of 'octopus sucker drawing', 'squid sucker drawing' and 'tentacle hair drawing' (I usually add 'drawing' to the end of my searches, because a good drawing shows the most important details of a shape only). I found a few I really liked, but they were all a bit too detailed for the avatar image I wanted to make. So I started searching for more stylized Splatoon Hair, until I stumbled on this image, which was adorable and perfect in every way. The suckers I drew were based on this image.

Next step is, the eyes.

Tentacle Shading Tutorial, Pass 3

Pass 3, Line art



Don't worry you didn't miss a page. I'm deliberately skipping steps 1 and 2 here, which are:

1, Reference: finding reference images you like, and asking yourself why you like them, what parts specifically you like.

2, Concept: making rough sketches, seeing what worked, and emphasizing that in the next sketch.

This is because, again, these are not my strong suit. So I'm starting at Line Art, which involves taking a concept sketch (e.g. a photo of a pencil drawing) and drawing over it in a program like Paint Tools Sai or Affinity Designer. You could use Photoshop, but personally I find Photoshop's pen tool to be an exercise in frustration. If you want a version of Photoshop that actually works, check out Affinity Designer. If you want something you can pick up really quickly, check out Paint Tools Sai.

In Affinity I find it best to draw the entire silhouette as one shape (i.e. draw a shape that outlines the entire image), then add extra lines inside for detail. This means you can then recolor the entire image just by changing the color one shape - if the final image turned out to be a little too pale or a little two purple, I can fix this by changing the color of a single shape.

Next step is, refinement.

Tentacle Shading Tutorial, Introduction

Welcome to my tentacle shading tutorial.

Here I'll be covering how to achieve the above image, step by step. The focus will be shading, not sketching. This is because I suck at sketching. I am a finishing artist - I can take concept art and turn it into polished, production art. Where I'm weakest is in creating said concept art in the first place. Thankfully my partner in crime, silentfort, is an extremely accomplished concept artist, who can take my insane ramblings and turn it into a powerful concept that conveys what I wanted.

I have to repeatedly remind myself that this is okay - in the same way that someone can be an expert electrician, but still not know how to build an entire house, one can be an expert artist in one of its many stages without having to be great at all of them, provided you can find other artists to collaborate with.

Or to return to the point - this will be a tutorial in what I am best at: shading, making flat images appear to have depth, texture, wetness, softness, etc. So let's begin.

If you'd like you can skip ahead to the part you want: